TBST Shielded Tents

The TBST-B line of shielded tents is designed to suppress interference from ambient noise when
carrying out EMC pre-compliance measurements. With sizes of 124 cm x 64 cm x 60 cm or 86 cm x
48 cm x 48 cm. The 124 cm tent can accommodate any Tekbox pre-compliance test equipment such
as LISNs or TEM-cells. The 86 cm tent can accommodate the TBTC0/1/2 and any of our LISN
models.
The shielded tents are made of two layers of conductive fabrics. It is supported by rigid aluminium
profiles. The filter panel at the side provides a 240V/10A mains AC filter (optional for the smaller tent),
two general purpose 240V/25A AC/DC filters and four coaxial feed through adapters with screw caps.
The access opening is sealed with conductive Velcro tape.

TBST-120/60/60/2-B; -86/49/45/1-B; -86/49/45/2-B

Outer dimensions: 124 cm x 64 cm x 60 cm (86 cm x 48 cm x 48 cm)
Opening dimensions: 85 cm x 35 cm (40 cm x 22 cm)
Frame: 20 mm x 20mm extruded aluminium profiles
Shielding: 2 layers of conductive fabrics
Seal: conductive Velcro tape
Suspension: Velcro straps
Filter panel: 1 x 240V/10A AC filter; IEC socket (optional for the smaller tent)
2 x 240V/25A DC filter; cables with female Banana couplers
3 x N- female feed through connector with screw caps
1 x BNC-female feed through connector
Internal AC Socket: pigtail cable with detachable female Schuko
Attenuation: up to 50 dB in the range 10 MHz to 6 GHz
Weight: 10.8 kg

TBST-200/100/100; -100/100/200

Outer dimensions: 204 cm x 104 cm x 100 cm (104 cm x 101 cm x 204 cm)
Opening dimensions: 130 cm x 46 cm (65 cm x 180 cm)
Frame: 20 mm x 20mm extruded aluminium profiles
Shielding: 2 layers of conductive fabrics
Suspension: Velcro straps
Filter panel: 1 x 240V/10A AC filter; C19 socket
2 x 240V / 25 A AC/DC filters, attached cables with Banana couplers
3 x N-Female coaxial feed-through connectors with screw caps
1 x BNC-Female coaxial feed-through connector with screw caps
Internal AC Socket: pigtail cable with detachable female Schuko + country specific AC cables with C13 connector
Attenuation: ~50 dB in the range 10 MHz to 6 GHz, see chapter 3
Weight: 17kg + 3kg (packaging)

Shielded Tent Assembly

With courtesy of Minmax Technology