Signal Injectors
Injection Transformers
Model
Application
Impedance
Frequency range
Internal termination resistor
Fuse
Dimensions
Product Page
TBJT01
Bode measurements
50 Ω
10 Hz – 45 MHz
5 Ω
125 mA polyfuse;
secondary (output) side
secondary (output) side
70 mm x 60 mm x 140 mm
TBJT02
Bode measurements
50 Ω
1 Hz – 7 MHz
5 Ω
125 mA polyfuse;
secondary (output) side
secondary (output) side
70 mm x 60 mm x 140 mm
TBJT03
Immunity testing
50 Ω
50 kHz – 50 MHz
n.a.; built in HPF to
suppress 50/60/400 Hz
suppress 50/60/400 Hz
n.a. secondary capacitively
decoupled with Y-capacitor
decoupled with Y-capacitor
70 mm x 60 mm x 140 mm
Bulk Current Injection Probes
Bulk Current Injection Probes are used to inject RF-current into cables of electrical equipment to test the susceptibility against radiated electromagnetic energy. Tekbox BCI-probes can be clamped around wire bundles with up to 27 mm. They are designed to meet the specifcations of the standards IC 61000-4-6 (domestic and industrial products) and ISO 11452-4 (automotive products).
Tekbox supplies suitable wideband power amplifiers to drive the BCI probes:
TBMDA-CDN25 for immunity tests according to IC 61000-4-6
TBMDA-BCI25 for immunity tests according to ISO 11452-4
The calibration fixture TBBCI1-CAL is suitable for both BCI-probe models
Model
Frequency range
Coupling loss
Maximum RF input power
Aperture diameter
Outer dimensions
Application / Standard
Product Page
TBBCI1-200K280
150 kHz – 230 MHz
8 dB typical
50 W
27 mm
92 x 76 mm
BCI probe for IEC / ISO 61000-6-4
TBBCI1-800K420
1 MHz – 400 MHz
5 dB typical
50 W
27 mm
92 x 76 mm
BCI probe for IEC / ISO 11452-4
TBBCI1-CAL
150 kHz – 400 MHz
–
500 W
–
200 × 150 × 140 mm
BCI probe calibrator for IC / ISO 61000-6-4, IEC / ISO 11452-4