LISNs are key components in EMC testing. To monitor undesirable emissions on the supply line, the LISN is inserted into the device under test’s supply line and utilised in conjunction with a measurement receiver or spectrum analyzer. Typically, the receiver or spectrum analyzer is operated by software such as EMCview. The software guarantees that the analyzer’s settings are in accordance with CISPR 16 specifications and allows you to load and run pre-configured tests for all main EMC standards. The measurement data points are graphed along with the selected standard’s limits and can be exported as test report.
One of the most important characteristics of a LISN is that it provides a fixed source impedance for the device under test. This assures that the measurement is repeatable, regardless of the output impedance of the power source used. This attribute is also used in many other EMC test setups that use LISNs to establish a fixed supply impedance rather than measuring transmitted emissions. As a result, LISNs can be found in test setups for radiated emissions, immunity testing, and a variety of other applications.

Model	TBL00705-2	TBL0110-2	TBL0225-2	TBL0225-2B	TBL0510-1	TBL0550-1B	TBL0550-1C	TBL05100-1C
Impedance	0.7µH//50Ω	1µH//50Ω	2µH//50Ω	2µH//50Ω	5µH//50Ω	5µH//50Ω	5µH//50Ω	5µH//50Ω
Frequency Range	30 Hz – 500 MHz	30 Hz – 500 MHz	10 Hz – 200 MHz	10 Hz – 200 MHz	10 kHz – 400 MHz	150 kHz – 400 MHz	10 kHz – 400 MHz	150 kHz – 400 MHz
Path	2	2	2	2	1	1	1	1
Max. Current	5A	10A	25A	25A	10A	50A	50A	100A
Max. Voltage	60V nominal, Component rating: 100V	60V nominal, Component rating: 100V	60V nominal, Component rating: 100V	60V nominal, Component rating: 100V	60V nominal, Component rating: 200V	max. 250V DC 250V AC 50/60Hz 130V AV 400 Hz	max. 480 V AC @ 50/60 Hz, 360 V AC @ 400 Hz, 230 V AC @ 800 Hz, 1200 V DC	Component rating: 0-500V @ 50/60 Hz 250V AC @ 400Hz 1000V DC
EUT Socket	4mm (banana)	4mm (banana)	4mm (banana)	4mm (banana)	4mm (banana)	wing-nut binding post	M8 screw terminal with protection cap	wing-nut binding post
Additional Features	400mΩ serial resistor	100mΩ serial resistor	100mΩ serial resistor	100mΩ series resistor and internal 10000µF capacitor	–	jumper configurable CISPR 25 MIL-STD-461G DO-160	10µH internal capacitor	Can be jumpered to various standards
Product Page	TBL00705-2	TBL0110-2	TBL0225-2	TBL0225-2B	TBL0510-1	TBL0550-1B	TBL0550-1C	TBL05100-1C

Model	TBL5032-1	TBL50100-1B	TBL50400-1B	TBL501000-1	TBL5008-2B	TBL5008-2C	TBL5016-2B	TBL5016-2C
Impedance	50µH//50Ω (50µH+5Ω)//50Ω	50µH//50Ω (50µH+5Ω)//50Ω	(50µH+5Ω)//50Ω	50µH//50Ω	(50µH+5Ω)//50Ω	(50µH+5Ω)//50Ω	(50µH+5Ω)//50Ω	(50µH+5Ω)//50Ω
Frequency Range	10 kHz – 100 MHz	150 kHz – 30 MHz	9 kHz – 30 MHz	150 kHz – 30 MHz	9 kHz – 30 MHz	9 kHz – 30 MHz	9 kHz – 30 MHz	9 kHz – 30 MHz
Path	1	1	1	1	2	2	2	2
Max. Current	32A	100A	400A	1000A	8A	8A	16A	16A
Max. Voltage	500V DC 270V AC (50/60 Hz) 120V AC (400 Hz)	500V DC 270V AC (50/60 Hz) 120V AC (400 Hz)	1000V DC 700V AC	1000V DC 500V AC	250V AC 50/60 Hz or DC	250V AC 50/60 Hz or DC	250V AC 50/60 Hz or DC	250V AC 50/60 Hz or DC
EUT Socket	4mm (banana)	8 mm wing terminals	16 mm wing terminals	16 mm wing terminals	Country specific mains socket	Country specific mains socket	Country specific mains socket	Country specific mains socket
Additional Features	can be jumpered to CISPR 16 50µH//50Ω or MIL-STD (50µH+5Ω)//50Ω no 250uH pre-filter	can be jumpered to CISPR 16 50µH//50Ω or MIL-STD (50µH+5Ω)//50Ω no 250uH pre-filter	internal HPF	internal HPF	separate RF outputs enabling LISN-Mate connectivity; Artificial hand connection PE switchable: 50Ω//50µH	Filter/Limiter/Attenuator switchable Artificial hand connection PE switchable: 50Ω//50µH	separate RF outputs enabling LISN-Mate connectivity; Artificial hand connection PE switchable: 50Ω//50µH	Filter/Limiter/Attenuator switchable Artificial hand connection PE switchable: 50Ω//50µH
Product Page	TBL5032-1	TBL50100-1B	TBL50400-1B	TBL501000-1	TBL5008-2B	TBL5008-2C	TBL5016-2B	TBL5016-2C

Model	TBL5016-3	TBL5032-3	TBL5063-3	TBLDC32-2	TBLVHF-B	TBISN-T4	TBLM2
Impedance	(50µH+5Ω)//50Ω	(50µH+5Ω)//50Ω	(50µH+5Ω)//50Ω	150 Ohm	50 Ohm +-10%	150 Ohm	–
Frequency Range	9 kHz-30 MHz	9 kHz-30 MHz	9 kHz-30 MHz	9kHz – 30 MHz	30 MHz-300 MHz	150 kHz – 30 MHz	150kHz – 110MHz
Path	3	3	3	2	2	2 balanced pairs	–
Max. Current	16A	32A	63A	32A	16A	250mA	–
Max. Voltage	465V/270V	465V/270V	690V/400V,50Hz/60Hz	1000V DC	250V DC – 400 Hz	60V AC, 100V DC	–
EUT Socket	CEE/EC60309	CEE/EC60309	CEE/EC60309	4mm, safety	Country specific	D-Sub 25	–
Additional Features	Artificial hand connection PE switchable: 50Ω//50µH	Artificial hand connection PE switchable: 50Ω//50µH	separate RF outputs enabling LISN-Mate connectivity Artificial hand connection PE switchable:50Ω//50µH	150 Ohm DC LISN A, B, Common Mode Differential Mode operation	balanced VHF LISN	2 pcs D-Sub 25 to RJ45 adapter	LISN Mate
Product Page	TBL5016-3	TBL5032-3	TBL5063-3	TBLDC32-2	TBLVHF-B	TBISN-T4	TBLM2

---

Ground Plane

Model	TBGP-250/140
Fabric dimensions	250 cm x 140 cm
Fabric thickness	0.7 mm
Fabric material	Polyester 45% + Silver 55% conductive fabric, fleece
Contact block dimensions	96 mm x 40 mm x 7.2 mm
Contact block weight	0.23 kg
Contact block material	nickel plated
Product Page	TBGP-250/140