Shielded Tents

Tents made of conductive fabrics are effective at shielding measurement setups from ambient noise. The shielded tents can be used to accommodate TEM-cells or small wideband antennas. Such a setup is used to obtain a spectral plot, that solely includes radiated emissions of the device under test. The spectral plot is used for a subsequent open area antenna test to identify DUT emissions in the dynamic ambient noise spectrum maze. This procedure with standard compliant antenna spacing simplifies obtaining a reliable radiated emission test result in EMC pre-compliance tests, where in most cases no absorber chamber is available.

Model	TBST-86/49/45/2-B	TBST-86/49/45/1-B	TBST-120/60/60/2-B	TBST-200/100/100	TBST-100/100/200
Outer dimensions	86x48x48 cm	86x48x48 cm	124×64×60 cm	204x104x100 cm	104x101x204 cm
Opening dimensions	40 x 22 cm	40 x 22 cm	85 x 35 cm	130 cm × 46 cm	130 cm × 46 cm
Frame	2020 extruded aluminium profiles	2020 extruded aluminium profiles	2020 extruded aluminium profiles	2020 extruded aluminium profiles	2020 extruded aluminium profiles
Shielding	2 layers of conductive fabrics	2 layers of conductive fabrics	2 layers of conductive fabrics	2 layers of conductive fabrics	2 layers of conductive fabrics
Seal	Conductive Velcro tape	Conductive Velcro tape	Conductive Velcro tape	Conductive Velcro tape	Conductive Velcro tape
Suspension	Velcro straps	Velcro straps	Velcro straps	Velcro straps	Velcro straps
Filter Panel	1 × 240V/10A AC mains filter, IC socket 2 × 240V/25A AC/DC filter, cables with female Banana couplers 3 pcs N- female + 1 pc BNC-female feed through connectors with screw caps	2×240V/25A AC/DC filter; cables with female Banana couplers 3 pcs N- female + 1 pc BNC-female feed through connectors with screw caps	1 × 240V/10A AC mains filter, IC socket 2 × 240V/25A AC/DC filter, cables with female Banana couplers 3 pcs N- female + 1 pc BNC-female feed through connectors with screw caps	1 × 240V/10A AC mains filter, IC socket 2 × 240V/25A AC/DC filter, cables with female Banana couplers 3 pcs N- female + 1 pc BNC-female feed through connectors with screw caps	1 × 240V/10A AC mains filter, IC socket 2 × 240V/25A AC/DC filter, cables with female Banana couplers 3 pcs N- female + 1 pc BNC-female feed through connectors with screw caps
Internal AC-socket	Pigtail with detachable mains socket, type F (Schuko)	Pigtail with detachable mains socket, type F (Schuko)	Pigtail with detachable mains socket, type F (Schuko)	Pigtail with detachable mains socket, type F (Schuko)	Pigtail with detachable mains socket, type F (Schuko)
Attenuation	Up to 50 dB in the range 10 MHz – 6 GHz	Up to 50 dB in the range 10 MHz – 6 GHz	Up to 50 dB in the range 10 MHz – 6 GHz	Up to 50 dB in the range 10 MHz – 6 GHz	Up to 50 dB in the range 10 MHz – 6 GHz
Suitable TEM-cells	TBTCO, TBTC1, TBTC2	TBTCO, TBTC1, TBTC2	TBTCO, TBTC1, TBTC2, TBTC3	TBTCO, TBTC1, TBTC2, TBTC3	TBGTC1
Product Page	TBST-86/49/45/2-B	TBST-86/49/45/1-B	TBST-120/60/60/2-B	TBST-200/100/100	TBST-100/100/200

---

Shielded Bags

Model	TBSB-70/40	TBSB-105/60
Outer dimensions	70x40cm	105x60cm
Shielding	2 layers of conductive fabrics	2 layers of conductive fabrics
Seal	Conductive Velcro tape	Conductive Velcro tape
Filter Panel	none	none
Attenuation	Up to 50 dB in the range 10 MHz – 6 GHZ	Up to 50 dB in the range 10 MHz – 6 GHZ
Suitable TEM-cells	TBTCO, TBTC1	TBTCO, TBTC1, TBTC2
Product Page	TBSB-70/40	TBSB-105/60

---

Ground Plane

Model	TBGP-250/140
Fabric dimensions	250 cm x 140 cm
Fabric thickness	0.7 mm
Fabric material	Polyester 45% + Silver 55% conductive fabric, fleece
Contact block dimensions	96 mm x 40 mm x 7.2 mm
Contact block weight	0.23 kg
Contact block material	nickel plated
Product Page	TBGP-250/140